Dell EqualLogic PS6100X Virtualized iSCSI SAN Storage Array. With 24 x 1.2Tb 10k SAS.
In good condition and full working order. 28.8Tb SAS 6GBps storage in 2U of rack space. 1 x Dell EqualLogic PS6100X Virtualized iSCSI SAN Storage Array. 2 x Control Module 11 Green Label. 4 x 1000BASE-T Network Interface Ports.
1 x 100Base-TX Dedicated Management Port. Support For RAID 5,6,10 And 50. 24 x 1.2TB 10k 6Gbps SAS Hard Drives.2 x 700w Power Supplies 010DKX. Built to make storage simple. Master your data-hungry tasks with EqualLogic PS6100X high-capacity performance with easy, flexible management for highly consolidated enterprise environments.
Designed to scale with your business. Fulfill your high-performance and high-capacity needs with the PS6100X GbE iSCSI array, a Dell Storage solution with a virtualized scale-out architecture that delivers enhanced storage performance and reliability that is easy to manage. Help eliminate downtime and performance penalties with smooth, incremental SAN expansion. Grow your virtual storage alongside your virtual server growth. Add or remove arrays at will, according to policy, age, application or business needs.
Easily mix new disk or network technologies in the SANMove volumes (databases/VMs) online between any pool or disk resources. Automatically balance loads across disks and multiple arrays in a pool. Help eliminate manual re-distributing of capacity or application workloads (downtime and services costs). Build more powerful storage using PS6100X arrays. The PS6100 Series family features.Dual controllers designed for built-in redundancy. Four GbE ports per controller. Dedicated 10/100 management port per controller. 7.2K NL-SAS, 10K SAS (or SAS SED), or 15K SAS drives or solid state drives (SSDs). Peer-scaling architecture that scales performance linearly.
Vertical Port Failover, designed to enable you to maintain full bandwidth if a networking port fails. Group Manager, which integrates all management into one console for both file- and block-storage protocols. Enhanced security with self-encrypting drives (SED). Storage Controllers: Dual controllers with 4GB non-volatile memory per controller.
Hard Disk Drives: Twenty-four (24) 10K SAS hot-pluggable hard disk drives. Drive Capacities: 2.5 10K SAS drives available in 600GB, 900GB, and 1.2TB (900GB also available in SAS SED). System Capacities: Up to 28.8TB. Volumes: Up to 1,024. Snapshots: 512 per volume / up to 10,000 total per group.
Volume Connections: Up to 1,024. Host Protocol: Any standards-compliant iSCSI initiator.RAID Support: RAID 5, RAID 6, RAID 10, and RAID 50. GbE Network Interfaces: Management network: One 100BASE-TX dedicated management port per controller. Interface ports: Four 1000BASE-T ports per controller. TCP Network Support: IPv4, IPv6 core support. Expansion Option: Can be combined with other EqualLogic PS Series arrays in the same SAN group, online. Up to 16 total members per group. Reliability: Redundant hot-swappable controllers with vertical port sharing, Hot-swappable disks and power supplies. Automatic spare configuration and utilization. Auto-Stat Disk Monitoring System (ADMS) to monitor health of data on disk drive. SAN Headquarters multi-group performance and event monitoring tool. Ability to configure a separate management network. SNMP, telnet, SSH, HTTP, Web (SSL), host scripting. Access control for management interfaces including Active Directory, LDAP, or RADIUS support. AC voltage: 100-240 VAC ±10% single phase. Power factor: 0.98 (minimum). Power supplies: Dual 700 W. Height: 2U / 87 mm (3.42 inches). Width: 446 mm (17.57 inches). Depth: 561 mm (22.09 inches). Weight: 24.2 kg (53.4 lbs). Rack Support: ReadyRails II static rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded-hole racks. Temperature range: 5° to 40°C (41° to 104°F). Storage temperature: 40° to 65°C (40° to 149°F). Altitude: For altitudes above 2950 feet, the maximum operating temperature is derated 1ºF/550 ft. Operating Relative humidity: 20% to 80% (noncondensing) with a maximum humidity gradation of 10% per hour.
Operational shock: Half-sine shock 31G +/- 5% with a pulse duration of 2.6ms +/- 10% in operational orientations only. Operating Vibration: 0.26 Grms (5 to 350 Hz) for 5 minutes in operational orientations. Air Quality: Airborne contaminant level of G1 or lower as defined by ISA-S71.04-1985. [ENTRY][BIST][EQL][TWDOG][WFP][C2F][WFR][CM1D][MESR][SCAN][BOOT2][PROC][BOARD][SMP][IOBUS][FLASH][USB].
# Part=70-0400 Rev=A03 SN= 1374001AA008Q ECO=C00 #. Bootloader Version 3.6.4 (SWINT Rev:1). Compiled on Mon Jun 27 10:20:45 EDT 2011. Enter Ctrl-P for boot prompt. Executing bootcmd0 dload sd primary/eqlstor.Preparing ffff bitmask of cpus to run. No network device to cleanup. Count = 16, total = 16.
All slave cpus (16) ack'ed userapp init. Count = 4, total = 4. All slave cpus (4) ack'ed message ring init. C2F Power Module revision number 0x04000000 string A00.
Tue Jun 23 05:48:55 EDT 2015. Jun 23 05:48:55 init: kernel security level changed from 0 to 1.C:1029:INFO:25.2.9:CLI: Login to account grpadmin succeeded, using local authentication. C:1037:AUDIT:25.7.0:CLI: Login to account grpadmin succeeded, using local authentication. CacheMode: write-back Service Tag: 3XNW75J. 0 70-0400 A03 Storage Array Firmware V6.0.7 (R367725) ok. 1 70-0400 A03 Storage Array Firmware V6.0.7 (R367725) ok. Name ifType ifSpeed Mtu Ipaddress Status Errors.
-------------- ---------- ----- --------------- ------. Name Value Normal Range Status. Backplane sensor 0 28 2-45 normal.
Backplane sensor 1 28 2-45 normal. Control module 0 processor 63 10-90 normal. Control module 0 chipset 35 10-70 normal. Control module 1 processor 69 10-90 normal.Control module 1 chipset 40 10-70 normal. Control module 0 SAS Controller 42 10-110 normal. Control module 1 SAS Controller 45 10-110 normal. Name Speed Normal Range Status. Name Status FanStatus Fw Rev. Power Cooling Module 0 on not-applicable 00.03.11. Power Cooling Module 1 on not-applicable 00.03.11. Because you have logged into the secondary control module, you can perform only. Service operations for this control module; array and group management operations. Connect to Port 0 on the active control module to perform array.
134:5:netmgtd [secondary]:23-Jun-2015 05:50:36.820006:rcc_util. C:1029:INFO::25.2.9:CLI: Login to account grpadmin succeeded, using local authentication. CacheMode: unknown Service Tag: 3XNW75J.
Slot Model Size Status Errors RPM. Control module 0 processor 65 10-90 normal. Control module 0 chipset 36 10-70 normal.
Control module 0 SAS Controller 43 10-110 normal. Power Cooling Module 0 no-power not-applicable 00.03.11. Power Cooling Module 1 no-power not-applicable 00.03.11. Do you really want to shutdown the system? Halt at Tue Jun 23 05:51:00 EDT 2015 -- please wait..613:0:logevent:23-Jun-2015 05:51:00.110001:logevent. Cc:259:WARNING::25.3.0:User has initiated a clean halt restart. The array has been halted. You can safely power off the array or type any key to restart the array. VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by purchasers in the EU (excluding UK) who are VAT registered.
LA 131961 A3/B10/B DUP W/HD. The item "Dell EqualLogic PS6100X Virtualized iSCSI SAN Storage Array 24x 1.2TB SAS 28.8TB" is in sale since Wednesday, February 21, 2018. This item is in the category "Computers/Tablets & Networking\Enterprise Networking, Servers\Network Storage Disk Arrays\SAN Disk Arrays". The seller is "itinstock" and is located in North London.
This item can be shipped worldwide.