Dell SCv2020 all-flash 30TB NAS ZFS FC16/10GbE license-free

We are offering a unique high-performance storage system based on Dell SCv2020 Compellent 24-disk SFF SAS2 array. The original Dell Compellent was based on proprietary licensed Storage Center software running on FreeBSD 10.0.

This system is running a standard FreeBSD 14.1 Release and is completely license-free and open. You can use any standard small-form-factor SAS2/SAS3/SATA hard drive you want in this system, either SSD or HDD.

In addition, two fibre channel 16 Gbps and two 10 Gbps Ethernet ports are available for block storage sharing and NFS3 or NSF4 file sharing at near wire-speed performance (see pictures). As configured, the array contains a single controller and eight 3.84 TB SAS SSD set up in raid0 ZFS configuration. Currently, two 4TB volumes are set up for FC block sharing, one per FC16 port. The rest of the disk space (about 20 TB) is available to NFS via two 10Gb ports. Sixteen disk slots are covered with disk fillers and are available for storage expansion.

We are offering 90 days free tech support to help you integrate the system according to your unique requirements. There are 3 management interfaces available in this system: 10GbE management port for in-band SSH login, serial console interface that can be used to set up the network parameters, and an in-band web management interface. The login information for all three interfaces is supplied with the manual.

Dual redundant hot-swap power supplies are installed. Specifications Configured Capacity: 30.4 TB Hard drives configured: 8 Samsung PM1633a Enterprise SSD SAS 3.84TB Read/Write bandwidth: up to 2.05 GB/s Read/Write I/O operations per second: up to 16,500 Hard drives: up to 24 2.5-inch SAS or SATA hot-swappable hard drives or solid-state drives Storage controller I/O: Two 16 Gbps fibre channel ports and two 10 Gbps Ethernet ports Storage connectivity: up to 192 drives, up to 14 SC200 expansion enclosures Management: ZFS and SCSI target utilities available in FreeBSD SAS connectors: two 6 Gbps SAS SFF-8086/SSF-8088 connectors for SAS expansion USB connector: USB3.0 Serial connector: used for configuration and support only functions Front panel. One two-color LED indicator for system status. One single-color LED indicator for power status.

Two-digit display indicating the storage system ID number. Operating temperature: 10°C to 35°C (40°F to 95°F).