Promise VTrak J630s 48TB JBOD Storage Array Expander 16x 3TB SAS-2 Hard Drive

Promise VTrak J630s Redundant SAS/SATA JBOD 48TB 16x 3TB HDD Dual I/O Modules Overview. Up to sixteen 3.5/2.5 HDDs or SSDs. SAS 6 Gb/s, 3Gb/s, (Optional SATA 6G/s, 3Gb/s and 1.5Gb/s with interposer backplane). Supports any mix of SAS and SATA drives simultaneously in the same enclosure. Each SBB 2.0 I/O module has two SAS ports using industry standard Mini SAS 4x wide-port-SAS connectors (SFF-8088), one IN and one OUT for cascading JBODs.

ANSI T10 SAS 2.0 and 2.1 Compliant. Self-configuring expander supports full SAS domain topology management. In-band access to Expander and PHY information. Statistic counters and performance monitors. SES EM SES Enclosure Management (ANSI T10 SES 2 Compliant).

SCSI SES command set over virtual SSP device. LED status indicator support for drives, FRU and enclosure environmentals. In-band SES enclosure management alerts user to out of spec operation: thermal condition, voltage condition or component failures, protecting data and hardware. Full subsystem management CLI through out-of-band RS232 serial port. The item "Promise VTrak J630s 48TB JBOD Storage Array Expander 16x 3TB SAS-2 Hard Drive" is in sale since Tuesday, November 5, 2019.

This item is in the category "Computers/Tablets & Networking\Enterprise Networking, Servers\Network Storage Disk Arrays\SAN Disk Arrays". The seller is "unixsurplusnet" and is located in Santa Clara, California. This item can be shipped worldwide.

• Number of Drive Bays: 16
• Interface: SAS
• Features: Hot Swap
• Model: Vtrak J630s
• Network Type: JBOD
• Installed Storage Capacity: 3 TB
• Storage Capacity: 3TB
• Type: Enterprise
• MPN: VTJ630s
• Brand: Promise
• Form Factor: 3.5 in